Address
304 North Cardinal St.
Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
Driver
Siemens TCP/IP Ethernet
Product Overview
The Siemens TCP/IP Ethernet driver exchanges data between OPC clients and Siemens S7-200, S7-300, S7-400, and S7-1200 PLCs using the TCP/IP Ethernet protocol. The driver talks directly to the S7 PLC using a standard PC network interface card, and does not require additional software packages or libraries. Specialized block read and write optimizations automatically increase the speed of many applications when using CP243, CP343, and CP443 communications processors.
The Siemens TCP/IP Ethernet driver also supports the netLink adapter cable.
- Supports multiple connections for each device
- Supports the CP-243, CP-343, and CP-443 TCP/IP Communications Cards
- Supports access on PC/PG/OP access ports
- Supports maximum Packet Data Unit (PDU) size configured on device for performance and efficiency
- Supports the following Memory Types: I, E, Q, A, M, F, T, C, Z, and Data Block Access
- Supports bit-level access
- Supports the low-cost NetLink communications adapter
- Supports the NetLink Configuration Utility (Gateway from Ethernet to S7 MPI)
- Supports Automatic Tag Generation from a Simatic STEP 7 project for S7-300 and S7-400 devices
- Supports Automatic Tag Generation from TIA Portal for S7-300, S7-400, S7-1200, and S7-1500 devices via the TIA Portal Exporter Utility
- Siemens Industrial Ethernet
- netLink 50-MPI – S7-300
- netLink 50-MPI – S7-400
- netLink -MPI – S7-400
- netLink-MPI – S7-300
- netTap 40-MPI – S7-300
- netTap 40-MPI – S7-400
- S7-1200- Family
- S7-1500- Family
- S7-200 – Family
- S7-300 – Family
- S7-400 – Family
目前暫無
- Manufacturing Suite
- Siemens Plus Suite
- Siemens Suite